Electrovalve 200PEB 2" - 24 V - RAIN BIRD

Class Leading Professional Series Plastic Irrigation Valves

The PEB series is our most durable plastic watering valve. This industrial strength fiberglass nylon globe valve is ideal for commercial applications.

The PESB series integrates patented scrubber technology for reliable performance in irrigation applications involving dirty water.

Features

• Durable fiberglass nylon construction with reinforced rubber diaphragm for long life and reliable performance    
• Globe configuration  
• Normally closed and forward flow design  
• Slow closure to avoid water hammer effect and consequent system damage  
• Low flow capability for a wide range of applications  
• One-piece solenoid with encapsulated piston and spring for easy servicing operations Prevents loss of parts during field service  
• Flow control handle adjusts flow rates as required  
• Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without first opening the valve at the controller  
• Manual external bleed allows waste to be removed from the system. Recommended for system start-up and after repairs  
• Stainless steel escutcheons moulded into the body. The lid can be fitted and removed more easily and more often without damaging the threads  
• Nylon scraper scrapes a stainless steel mesh to clean and break down debris and plants. Prevents debris build-up and clogging (PESB series only)  

Specifications

• Pressure: 20 to 200 psi (1.4 to 13.8 bar)
• Flow without PRS-D option: 0.25 to 200 GPM (0.06 to 45 m³/h; 0.02 to 12.60 l/s)
• Flow rate with PRS-D option: 5 to 200 GPM (1.14 to 45 m³/h; 0.32 to 12.60 l/s)
• Temperature: Up to 150°F (66°C)

Electrical Specifications

• 24 V ac 50/60 Hz (cycles per second) solenoid power requirements
• Inrush current: 0.41 A (9.9 VA) at 60 Hz
• Holding current: 0.14 A (3.43 VA) at 60 Hz
• Solenoid coil resistance: 30 - 39 ohms, nominal

Options

• Allows field installation of an optional PRS-D pressure regulator module to ensure optimum sprinkler performance. Sets up to 100 psi (6,9 bar)
• Compatible with Rain Bird latching solenoid for use with Rain Bird battery-powered controllers up to 150 psi (10,35 bar).
• Compatible with ESP-LXD decoders
• Optional purple flow control handle for non-potable water applications PEB-NP-HAN1 (1"); PEB-NP-HAN2 (1½" and 2").

Dimensions

• 200-PEB: 8" x 6" x 6" - (20.3 cm) x (15.2 cm) x (15.2 cm)

Note: PRS-D option increases valve height by 2" (5.1 cm).