Maytronics
Zodiac
CTX
Bayrol
HTH
Piscimar
Spamar
AquaFinesse
Quimicamp
ACF-50
Astralpool
Polaris
Ecopool
Hayward
Davey
Poolstar
Wellis
Cet Cryospas
Karcher
Aquark
Weber
Igno
Hunter
RainBird
HOOVERS AND ROBOTS
HEAT PUMP
GRILLERS
SPA & WELLNESS
SALT ELECTROLYSIS
CHEMICAL PRODUCTS
WATER TREATMENT
WATER
Product information
Brand
CERTIKIN
Projector Quick Change for concrete or liner (with cable 2,80m), quick and easy assembly to replace without screws with super sturdy transparent cover to protect the lamp ruptures. Filmography
300W 12V PAR56 lamp with cable glands. Aro trim in white ABS.
There are the following models:
- with niche and cable concrete
- with niche and cable liner
- with niche and wireless Concrete
- with niche and without cable liner
- no niche and cable replacement
fast and screwless mounting projector with a safety cap super strong and transparent to protect against break lamp.
Projector
Quick Change concrete (with 2.80 cable m), PAR56 12V 300W lamp with cable glands, white ABS trim ring and transparent cover to protect the lamp with integrated transparent safety cap, super tough and easy to change.
Quick Change concrete (with 2.80 cable m), PAR56 12V 300W lamp with cable glands, white ABS trim ring and transparent cover to protect the lamp with integrated transparent safety cap, super tough and easy to change.
Filmography Ideal for:.. concrete pools, prefabricated pools and liner Filmography high quality projector and very easy to assemble and disassemble
This projector is designed to be totally submerged in fresh water pools <. / div>
This projector is designed to be totally submerged in fresh water pools <. / div>
Filmography is an electrical device of class III with very low safety voltage (12 V with alternating current).
to clearly light a pool it is recommended to install a projector every 20 m2 of water surface.
in especially deep pools, a projector will be needed every 25 m3 of water volume.
to avoid reflections, the projectors should be installed facing the opposite direction of the house or the usual pool. Filmography in if using lighting in training or competition pools, the projectors should be installed on the sides to prevent glare on the swimmers.
to avoid emptying the pool for maintenance, it is recommended to install the projector in places accessible from the top edge of the pool.
to clearly light a pool it is recommended to install a projector every 20 m2 of water surface.
in especially deep pools, a projector will be needed every 25 m3 of water volume.
to avoid reflections, the projectors should be installed facing the opposite direction of the house or the usual pool. Filmography in if using lighting in training or competition pools, the projectors should be installed on the sides to prevent glare on the swimmers.
to avoid emptying the pool for maintenance, it is recommended to install the projector in places accessible from the top edge of the pool.
Produtos recomendados
- Choosing a selection results in a full page refresh.