Product information
Brand
Zodiac
-
To preserve the humidity in your indoor pool, you can count on the effectiveness of the built-in DF dehumidifier.
It has the additional advantage of being practically invisible: installed on the wall between the engine room and the pool area, only the suction and ventilation grids are visible from the pool. Very simple installation : just place it on the wall and it will take up little space.
This control box allows you to adjust the hygrometry rate and maintain your usual comfort level: 65%. It is also used to adjust the thermostat on models with the air heating option.
-
Simple installation, through the wall, at height (from 1.2 m to 1.3 m from the ground)
-
Optional air heating (with electric complement or hot water coil)
-
Modular: standard right and left side access (optional)
INSTALLATION:
ts-
Installation at a technical site close to the pool site.
-
Aluminum insufflation and aspiration grid to be installed in the insulating structure.
-
Possibility of a double deflection insufflation grille to direct hot, dry air to the windows.
-
Hot water battery mounted inside the equipment (optional).
-
Electric heating complement with built-in electrical resistances (optional).
-
Suction filter.
INCLUDES:
- 1x 5l/h dehumidifier
- 1xHydrocontrol (humidity and temperature controller)
- 1x Piece of lead with frame + grids
- 2x Wall fixing squares
- 4x Anti-Vibration Blocks
- 1x Ø32 half-joint to be glued + 1” PVC joint + gasket
- 2xWith condenser option: Ø50 half-joint connections to be glued + gaskets
- 2x With hot water coil option: sockets to be soldered Ø20/22 + gaskets
-
Produtos recomendados
- Choosing a selection results in a full page refresh.