BELLASUN Automatic Raised Roof

WHY CHOOSE A HIGH AUTOMATIC COVER
GUARANTEED SAFETY

The BELLASUN automatic raised cover guarantees optimum pool safety.
- It complies with the NF P90-308 standard depending on the safety system chosen:
- STAINLESS STEEL safety system, the cover complies if and only if the inside width of the pool is greater than or equal to 2.30 metres.
- ABS safety system or with a FABRIC handle, the cover complies if and only if the inside width of the pool is greater than or equal to 2 metres.
- Ultra-resistant brackets for fixing to the wall or under coping permanently close and secure the pool. Once fitted, access to the water becomes impossible*.
- Raised covers, once closed, also protect the pool from impurities: leaves, pollen, dust...
- Finally, they provide a thermal barrier: they reduce water evaporation and heat loss.


TECHNICAL AND PRACTICAL ADVANTAGES
Easy to use: Thanks to its tubular motor inserted into the shaft and, with a simple turn of the key or via your smartphone using the Cover Connect APP (optional), the cover easily rolls up and unrolls in an instant Disengageable motor: For greater peace of mind and for the safety of the pool, in the event of a prolonged power failure or any other possible malfunction, the cover can be manually operated.

Peace of mind: Equipped as standard with an end-of-stroke system, once you start closing, the cover automatically stops at the end of the pool.



The Bellasun model has a simplified, state-of-the-art design. Aesthetic integration into the pool area with its 'Full Black' solar panel.
Ideal for existing pools, easy to install, no electricity required. Autonomous model powered by a solar panel with battery autonomy for 20 openings/closings. Charge regulator to protect the battery from deep discharges.

Anodised aluminium shaft Ø 146 mm or Ø 196 mm and rilsanised aluminium base for optimum corrosion resistance.

For perfect harmony, the stainless steel safety straps can be matched to the colour of the PVC slats.

The maximum size of the cover is for swimming pools (interior dimensions):


MECHANICAL KIT:
Includes the following elements:
- Aluminium support
- Anodised aluminium shaft.
- Disengageable motor with limit switch.
- 24V battery
- Photovoltaic panel
- Key switch, installed on the bracket

ATTENTION:
- The solar panel must be exposed to the sun and away from any shaded areas.
- Electrolysis contact incompatible with the system.
- Cover Connect incompatible with the system.



AstralPool's automatic covers use watertight hollow extrusion PVC sheets. End caps welded at both ends ensure the tightness of the sheets and the 20cm wide tabs on the cover can ensure the total length of the sheet. The tabs can also be 10 or 30 mm, altering the total width of the pool cover.
The blades measure 71.4 mm in length and are 17 mm thick, so they can float. To prevent staining, particularly organic staining, the slats are stabilised with calcium and zinc.

To ensure the roof fits in with its surroundings, various slat models are available: white, sand, grey and medium grey



If you would like a quote for the cover, please fill in the following form