The PAR56 underwater lamp improves energy efficiency when compared to traditional PAR56 300W halogen lamps. It should always be installed completely submerged. PAR56 lamps can be adapted directly with 300W halogen lamps/projectors.
Service life 25000 h.
The RGB lamp is controlled by a remote control, which is included, with a range of 2m and can control 2 lamps. The white lamp does not include the remote control.
To light a pool correctly, it is advisable to install a lamp of this range for every 15m2 of water surface.
Note: this recommendation applies to coloured pools with white light projectors, but if there are RGB projectors more should be installed. In dark pools it is recommended to use more floodlights per m2.
PAR56 floodlights require a niche to complete the installation.
The Flat spotlight for wall installation is supplied with accessories for installation in concrete and polyester pools. To complete the installation in panel pools you need kit 24765-0500.
PAR56 Floodlights
Must be connected to a 12VAC safety transformer. 2.5 m cable. IPX8 protection.
PAR56 lamps
Must be connected to a 12VAC safety transformer. IPX8 protection.
Flat projectors
Must be connected to a 12VAC safety transformer. 2.5 m cable. IPX8 protection.
Light Colour |
Consumption |
Luminous flux |
White - E | 11.5W
(18VA) |
1300 lm |
RGB - G | 15 W
(23 VA) |
900 lm |