Electrovalve PGA-200 2” - 24 V - RAIN BIRD

Plastic globe and angle valves. The most robust and reliable valves in their class

Designed for high-end residential and small commercial installations, Rain Bird® PGA series valves are the most robust and reliable valves in their class. These durable and easy-to-maintain valves are proven to perform even in harsh temperature and pressure environments. For your peace of mind, PGA series valves also come with a best-in-class, three-year commercial warranty. Because your reputation matters to you-it matters to us.

Extreme Durability

The PGA valve maintains a strong, trouble-free seal between body and cap under all conditions. In temperature cycling tests, hundreds of PGA valves have been exposed to extreme temperature changes and intense pressures. The result: zero leakage*.

Pressure-resistant seal

The body seal for the PGA valve cover is designed to withstand the intense water pressure common to many commercial sites. Faced with repeated pressure releases that easily reach triple digits, our valves outperformed the nearest competitor by more than 2½ times to 1 in the pressure cycle test.*

Ease of Maintenance

Multi-key bolts simplify the maintenance of PGA valves. With a choice of flat, Phillips or hex head, you have the freedom and convenience to perform your tasks faster.*Currently available on 2" PGA models only.

Quiet performance

With its solid electrical design, the PGA valve significantly reduces noise and provides years of reliable operation. So not only will you enjoy peace of mind, you'll have silence and peace.

Features

• Seal between body and cap for maximum reliability even in the most extreme conditions  
• Robust construction and electrical design for quiet and reliable operation  
• Flow pilot with filtration system for increased resistance to debris and clogging  
• Slow closure to avoid water hammer effect and consequent damage to the system  
• Normally closed and forward flow design is latching solenoid compatible for use with Rain Bird battery-powered controllers  
• Multi-head (Phillips, flat head or hex) screws for easy maintenance  
• Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on the controller  
• One-piece solenoid with encapsulated plunger and spring for easy servicing operations. Prevents loss of parts during field service Three-year warranty  
• Allows field installation of an optional PRS-D pressure regulator to ensure optimum sprinkler performance  
• Latching solenoid compatible for use with Rain Bird battery-powered controllers

Options

• Allows field installation of an optional PRS-D pressure regulator module to ensure optimum rotor performance. Sets up to 100 psi (6,9 bar)  
• Compatible with Rain Bird latching solenoid for use with Rain Bird battery-powered controllers up to 150 psi (10,35 bar).  
• Compatible with ESP-LXD decoders

Specifications

• Pressure: 15 to 150 psi (1.04 to 10.4 bar)
• Flow without PRS-D option: 2 to 150 gpm (0.45 to 34.05 m³/h; 7.8 to 568 l/m)
• Flow rate with PRS-D option: 5 to 150 gpm (1.14 to 34.05 m³/h; 19.2 to 568 l/ m)
• Water temperature: Up to 110 °F (43 °C) - See table in photo section above
• Ambient temperature: Up to 125 °F (52 °C)

Electrical Specifications

• 24 VAC 50/60 Hz (cycles per second) Solenoid Power Requirements
• Inrush current: 0.41 A (9.9 VA) at 60 Hz
• Holding current: 0.14 A (3.43 VA) at 60 Hz
• Solenoid Coil Resistance: 30 - 39 ohms, nominal

Dimensions

• 200-PGA: 10" x 7¾" x 5" (25.4 cm) x (23.5 cm) x (12.7 cm)