Recommended for all electrified irrigation system installations.
They allow the transport of power and supply between controllers and solenoid valves or sensors.
General features (single-line series)
Cable for low voltage installations.
- Rigid bare copper core.
- PVC insulation, non-flame-propagating.
Standardisation: NP - 2356, HD 21 - EN 60228:2005
Non-flame propagating - EN 50265-2-1.
Rated voltage: 450 / 755 V
External colour: Green or red
DIMENSIONAL CHARACTERISTICS - MATERIALS
Conductive cores
Nominal cross section straight - 1,5 mm2
Material - Rigid circular bare copper
No. of core wires - 1
Nominal core diameter - 1,35 mm
Isolation
Material - PVC TI 1-HD 21.1.S4
Nominal and average thickness - 1.75 mm
Minimum thickness - 1.7 mm
Application - Extrusion
No. of core wires - Green and red
Conductor
Nominal outside diameter - 4.85 mm
Nominal weight - 40 kg / km
ELECTRICAL CHARACTERISTICS
Rated voltage: Uo / U - 450 / 750 V
Maximum ohmic resistance in direct current at 20º C - 12,1 / km
Maximum ohmic resistance in direct current at 70º C - 14,5 / km
Maximum allowable current, permanent regime, a conductor in the open air, 30º C - 20 A
Maximum allowable temperatures continuous regime / short-circuit - 70 / 160º C
Maximum permissible short-circuit current t= 1 sec. - Ti/Tf= 70 / 160º C - 0.17 (kA)