Anodic protection - Corrosion protection BLUEZONE

BLUEZONE anodic protection ideal for salt-treated pools or those equipped with a Redox dosing pump. Protection against corrosion for all stainless steel equipment installed in salt-treated pools. Stabilises the reading of the Redox probe in pools fitted with a Redox dosing pump.

Prevents electric shock in polyester pools and includes a long-lasting zinc spring that is easy to replace when worn out.

Advantages: By installing this equipment in salt-treated pools, it prevents electrolytic corrosion of stainless steel products such as stainless steel steps, recessed and stainless steel lighting, U.V. equipment enclosure, heat pump exchanger and the titanium plates of the salt electrolysis machine cell.

Easy to install equipment.

Polyester pools: the zinc anode (spring) provides a shield that protects users from the risk of electric shock.

Easy to install.

Operation: After installation, the zinc spring (anode) will be consumed, preventing erosion/corrosion of the pool's constituent metallic equipments, such as aluminium, stainless steel, cast iron, copper and titanium.

Usage advice: You should replace the anode (zinc spring) after half is corroded, normally after three years.

Material:

Fibreglass-reinforced polyester laminated filters.

Extra wide transparent cover: inner diameter: 363 mm. 

Outer diameter: 530 mm.

Specific characteristics:

Maximum working pressure: 4 bar.

Dimensions: 63 mm, width: 190 mm and height: 137 mm (excluding zinc spring).

Technical specifications: Maximum filtration speed: 50 m3/h/m2

Filter tested at a pressure: 3.5 bar

Maximum operating pressure: 2.5 bar.

Considerations: Provide the equipment's earth connection. (see installation diagram).

Installation diagram: The equipment must be installed after the filter and before the salt electrolysis cell.