At IoT-Pool, we are always looking for partnerships that reflect our commitment to quality, innovation and customer satisfaction. It is with great enthusiasm that we highlight our collaboration with Piscimar, a renowned brand in the pool care and treatment sector.
In this blog, we'll show you some of the tips and products that make this brand stand out in the market. This strategic partnership allows us to expand our offer and guarantee access to the most advanced pool care and maintenance products.
HOW TO PREPARE YOUR POOL WITH PISCIMAR
How do I remove limescale from the tablets?
1. Apply the cleaner directly, without using a mask.
2. Leave on for as long as possible and brush off.
3. Rinse with water.
PM-132 FORTIUS PM-102 Scale & Stain Cleaner
Why should filters be cleaned?
Filters look clean, but millions of bacteria and residues accumulate, contaminating and unbalancing the water.
Vidromar product advantages - filter glass
"Replace the sand in your filter with the only micropolished, ultra-filtering glass."
5 STEPS TO A PERFECT POOL
Before taking any action on your pool, it's important to have the water analysed to find out the values found for alkalinity, pH, phosphate levels and other factors.
1. Adjust the alkalinity
Adjust it to 100ppm and you'll see how the pH doesn't fluctuate, consuming less disinfectant.
2. Adjust the pH
Adjusting the pH to 7.2 makes the chlorine disinfect more effectively. The higher the pH, the lower the disinfection capacity, the higher the consumption of disinfectants and the more problems you will have with algae and bacteria.
PM-632 pH+ PM-602 pH+ PM-602L pH+
3. Removing phosphates
Phosphates are the food of algae and are essential for their photosynthesis and development. That's why we recommend analysing their concentration at the start of the season using the phosphate kit and, if their presence is detected, carrying out a treatment with one of our phosphate removers. Pool maintenance will be much simpler and more economical.
PM-625 PHOS-OUT PM-675 PHOS-OUT 3XL
4. Shock treatment
New/hibernated/green water.
PM-531 RITOCAL GR PM-460 OXIPURE 12
PM-420 ACTIBON SHOCK PM-643 ULTRA CLEAR
PM-503 DICLORO SHOCK GR PM-501 MAXICLOR GR
5. Maintenance
Analyse the water every week.
The most important parameters can be analysed quickly and easily with the FTK range of strips and the appropriate treatment applied in each case. FTK STRIPS are ideal for quick and simple analyses.
Up to 7 parameters in just 15 seconds, with the BEHQ guarantee.
Adjust the maintenance disinfectant (chlorine or bromine)
We recommend setting between 1 and 2 ppm for chlorine and between 3 and 5 ppm for bromine. If you have a salt electrolysis system, the recommended level is the same as for solid chlorine, between 1 and 2 ppm.
PM-532 RITOCAL 200 PM-522 MAXICLORTRICLOR 200
PM-552 POLICLOR 200 PM-582 POLICLOR LINER 200
Clarifiers
Coagulants are more efficient and retain more particles (pollen, mud, suntan lotion, etc.) than flocculants. Without clogging the filter or depositing anything at the bottom.
the bottom. They reduce stains on the float line and are compatible with any filter medium.
PM-613 GOLDENFLOK PM-663 CLEANPOOL Tab 20
Algaecides
Algaecides act as a defence and prevention to minimise the growth of algae and bacteria. Especially when the disinfectant is below the required values.
⚠️ DON'T USE ALGAECIDES WITH FREE COPPER. They stain swimsuits, dye hair green and cause stains in the pool.
These are just some of the tips and suggestions Piscimar has to share with its customers. Our collaboration aims not only to provide high-quality pool care products and solutions, but also to ensure that you have the information you need to keep your pool in perfect condition.
Thank you for trusting IOT Pool and Piscimar to look after your leisure space. Until the next blog!