Product information
Brand
ACUALÉ
Mechanism
Manual
MAXIMUM PROTECTION
These covers are designed for customers who want to get the most out of their cover. Its characteristics allow us to use it all year round, in winter as a winter cover and in summer as a thermal blanket, as it keeps the heat in.
Its collection system with a crank makes this cover easy to handle for the customer and above all it keeps the water cleaner.
Its main function as a safety element is to prevent falls into the pool when there are children and pets.
THE STRUCTURE
It is made up of 40Ø and 2mm thick aluminium bars with 8 interior reinforcement ribs, silver colour and 630gr high density polyester canvas.
The maximum recommended width of the cover (bar measurement) is 5,50mt. The fixings consist of a tensioner system, on one side they are fixed and on the back side there are tensioning ratchets (as required depending on the cover).
All our safety covers are equipped with sides, also known as anti-wind. The retraction system is by means of a manual equipment to roll up the cover, which facilitates daily opening/closing. On covers longer than 10 metres in length and wider than 4.50 m, an additional crank is recommended.
Standard Cover
As it has fewer bars, each from 1.50 to 1.80, it is lighter and suitable for those looking for a comfortable and practical daily system.
As for the measurements of the pool, it will be increased by 25cm around the perimeter, so for a 4,00 x 8,00 pool, a 4,50 x 8,50 cover will be made.
The maximum recommended width of the cover (bar measurement) is 5.50m.
Distance between support bars: 1'5m - 2 m
Plus cover
This is a more reinforced enclosure. Support tubes are welded at the top every 1.00 to 1.20m. Anti-abrasion reinforcement, perimeter welded safety tape, perimeter super drainage, and anti-wind lashings.
A cover designed for those seeking maximum safety and a modern, integrated finish.
As for the measurements of the pool, it will be increased by 25cm around the perimeter; thus, for a 4.00 x 8.00 pool, a 4.50 x 8.50 cover will be made.
The maximum recommended width of the cover (bar measurement) is 5.50m.
Distance between support bars: 1'5m - 2 m
Produtos recomendados
- Choosing a selection results in a full page refresh.