Product information
Brand
ASTRALPOOL
Mechanism
Automatic
Solar automatic cover works with solar energy and stands out for being highly ecological. Savings in water consumption by evaporation and reducing the pool heat loss. On the other hand, minimizes premature evaporation of the treatment chemicals. Certified by the French standard NF 90-308 solar cover guarantees us a higher quality, reducing possible accidents by falling in the water children, animals, objects, ...
Main advantages:
- Simplified installation requires no wiring (power through solar energy).
- Autonomy 40 cycles:. Once the battery is charged and in the absence of light, can open and close the 40-fold coverage
- Coverage easy to use and low maintenance costs.
General Features:
- Copper pools up to 6 x 12 m with ladder.
- Drum with power by solar energy. One of the supports is equipped with a photovoltaic cell.
- Motor reducer 150 Nm 12 v. Tubular. Axle anodized aluminum.
- to limit rote system.
- Three different color plates and caps: white, sand and blue .
- Two 12-volt batteries.
It is important to note that when a high kind of coverage, the winding shaft is located outside the pool, resting on fixed supports in the area surrounding the pool.
The colors of the blades can be:
- flat PVP White
- PVP smooth Sand
- Gray smooth PVP
- PVP smooth gray Mean
- Polycarbonate Solar Blue
- Clear Polycarbonate
- Clear Polycarbonate Solar
- Polycarbonate Solar Gray
IMPORTANT NOTE - INSTALLATION CAUTION:
-
The sun has to focus directly on the photo- voltaic plate.
-
Do not install under a tree or oriented to the north.
Filmography
DOWNLOAD
Filmography
Directions for use and hibernation
We recommend that you follow these simple guidelines for the proper functioning of the automatic cover:
-
Before any action on the cover, you must ensure that no person is not in the pool and there are no objects that might obstruct the correct maneuver.
-
To maintain a good level of water is also important since a level too low or too high can cause a blockage of the beam, the separation wall or ladder.
-
During the maneuvers to cover or close to not block the cover, this action may be dangerous, besides being detrimental to the operating mechanism.
-
When using an automatic cleaner must verify that the opening operation of the cover was not wrapped around the pipe or power cable.
-
It is recommended to regularly clean cover with a pressure cleaner or a liquid descaling PVC. We must also avoid the leaves stay on the coverage as they can stain the slides.
-
In the case of hail recommend that collection coverage.
-
In the submerged model (buried) Roussillon, Roussillon II, we recommend you always keep dry the motor housing to prevent it from getting wet
.
For a good sleep and that in the spring find the pool in the best conditions, we must follow these basic tips:
-
Leave the peeled cover on the water level.
-
Maintain regular water level. A possible excess must be removed from the drain or the drain of skimmers.
-
It is advisable to clean the valve and the motor housing with a high-pressure cleaner before the pool hibernation.
-
We put a series of anti-ice floats in the valve housing, behind the cover. We must also protect the skimmers with some anti-ice buoys.
-
recommended to install a cover to prevent leaves and other waste may hide valve. This cover should be cleaned regularly.
-
In the case of ice formation, we recommend not to press the blades becomes not damaged.
-
In the case of the engine flood risk, it is advisable to cut the power supply of the electrical box and disassemble the engine.
If you would like a quote for the cover, please fill in the following form
Produtos recomendados
- Choosing a selection results in a full page refresh.