Electrical Panel PUMP CONNECT VITALIA

This frame incorporates LivePool technology for a connected and intelligent pool!

- Live Pool is a modular and evolving solution that enhances the performance and efficiency of professionals.

- The LivePool application simplifies users' lives by enabling them to view the pool's essential parameters and manage the equipment.

- Live Pool equipment optimises its operation by communicating with each other via a local, private and secure wireless network.

FEATURES:

- Pump Connect is a board that manages filtration and lighting.

- Automatic pairing with other Live Pool equipment in the pool (pH connect, RX connect....).

- No electrical connection to be made between Live Pool equipment.

- Local or remote connectivity.

- Secure access to the mobile application.

- Auxiliary output powered to serve electrically a non Live Pool equipment (3 A max.) : electrolyser, dosing pump, suppressor.

FILTRATION:

- 3 filtration modes: manual, clock and automatic, depending on water temperature (probe supplied).

- 3 operating modes in clock mode.

- Display of water and air temperature (probes supplied).

- Numerical temperature probes with stainless steel head and 5m cable to be installed on the load socket (not supplied). Wall bracket for air T° probe included.

- Electronic motor circuit breaker adjustable from the Live Pool application.

- Circuit breaker disconnect warning from LivePool application.

- Power consumption of the filtration pump displayed via the LivePool application.

- Integrated defrost function (thanks to the probe supplied).

- Parameter setting of the defrost mode activation temperature from the LivePool application.

- Maintenance mode can be activated directly from the control panel, in order to manually control filtration and block the operation of the appliance (to wash the filter or use it without the mobile appliance).

- Single-phase pump up to 1.5 HP.

- Diode on the front of the frame, allowing the operating status of the pump to be displayed.

LIGHTING:

- Leds lamps management (white or RGB ( 2 x 50 W max.).

- Manual mode or programmable according to 3 time periods.

- Switch-off mode can be set from the LivePool application.

- Sequential colour change through LivePool application, in case of RGB leds.

- 2 on/off cut-off times to allow adaptation to the different types of RGB Led.

- Maintenance mode can be activated directly on the control panel in order to manually control the lighting and block the operation of the application (use without the mobile application).

- LED on the front of the control panel, allowing the operating status of the lighting to be displayed.