Product information
Brand
ASTRALPOOL
Mechanism
Automática
The automatic cover model Carlit N-con system limit is ideal for installing on the floor in existing swimming pools whose measures do not exceed:
- 3x18 m more ladder
- 4x17 m more ladder
- 5x17 m more ladder
- 6x16 m more ladder
- 7x14 m more ladder
It is important to note that when a high kind of coverage, the winding shaft is located outside the pool, resting on fixed supports in the area surrounding the pool.
KIT MECHANIC:
It comprises:
- Two stainless steel feet. lacquered white or sand color. Filmography
- anodized aluminum Ø146mm axis (up to 12MT) and Ø196mm (up to 17mt)
- tubular motor 24V with Limit setting.
- Key switch with automatic reset to zero.
- Table plates with 220 / 24V transformer.
The colors of the blades can be:
- flat PVP White
- PVP smooth Sand
- Gray smooth PVP
- PVP smooth gray Mean
- Polycarbonate Solar Blue
- Clear Polycarbonate
- Clear Polycarbonate Solar
- Polycarbonate Solar Gray
Filmography
Directions for use and hibernation
We recommend that you follow these simple guidelines for the proper functioning of the automatic cover:
-
Before any action on the cover, you must ensure that no person is not in the pool and there are no objects that might obstruct the correct maneuver.
-
To maintain a good level of water is also important since a level too low or too high can cause a blockage of the beam, the separation wall or ladder.
-
During the maneuvers to cover or close to not block the cover, this action may be dangerous, besides being detrimental to the operating mechanism.
-
When using an automatic cleaner must verify that the opening operation of the cover was not wrapped around the pipe or power cable.
-
It is recommended to regularly clean cover with a pressure cleaner or a liquid descaling PVC. We must also avoid the leaves stay on the coverage as they can stain the slides.
-
In the case of hail recommend that collection coverage.
-
In the submerged model (buried) Roussillon, Roussillon II, we recommend you always keep dry the motor housing to prevent it from getting wet
.
For a good sleep and that in the spring find the pool in the best conditions, we must follow these basic tips:
-
Leave the peeled cover on the water level.
-
Maintain regular water level. A possible excess must be removed from the drain or the drain of skimmers.
-
It is advisable to clean the valve and the motor housing with a high-pressure cleaner before the pool hibernation.
-
We put a series of anti-ice floats in the valve housing, behind the cover. We must also protect the skimmers with some anti-ice buoys.
-
recommended to install a cover to prevent leaves and other waste may hide valve. This cover should be cleaned regularly.
-
In the case of ice formation, we recommend not to press the blades becomes not damaged.
-
In the case of the engine flood risk, it is advisable to cut the power supply of the electrical box and disassemble the engine.
Produits recommandés
- Choosing a selection results in a full page refresh.