Maytronics
Zodiac
CTX
Bayrol
HTH
Piscimar
Spamar
AquaFinesse
Quimicamp
ACF-50
Astralpool
Polaris
Ecopool
Hayward
Davey
Poolstar
Wellis
Cet Cryospas
Karcher
Aquark
Weber
Igno
Hunter
RainBird
HOOVERS AND ROBOTS
HEAT PUMP
GRILLERS
SPA & WELLNESS
SALT ELECTROLYSIS
CHEMICAL PRODUCTS
WATER TREATMENT
WATER
Product information
Brand
ASTRALPOOL
Mechanism
Automatic
The Narbonne coverage is ideal both in existing pools as new construction. Incorporating a protective housing for the mechanics of coverage, providing greater safety and improving the design, easy installation.
In Narbonne model the motor is located on the same axis winding so that the mechanics is fully integrated around the pool. The box is protected by PVC slide (white color, sand or wood).
Its principal elements are a tubular motor with limit switch, a key switch with automatic return incorporated in the leg cover and a frame transformer.
General Features:
- Copper pools up to 14 x 6 m with ladder.
- limit switches for storage system.
- 4 possible types of housing: the housing is protected by PVC blades (wood color, white or sand) or wood IPE. Foot white color.
- Accessibility to the engine by the foot of the box.
- Motor 12 volts.
- Ability to request a collapsible box to access the blades.
- engine to accessibility without touching the box.
It is important to note that when a high kind of coverage, the winding shaft is located outside the pool, resting on fixed supports in the area surrounding the pool.
The colors of the blades can be:
- flat PVP White
- PVP smooth Sand
- Gray smooth PVP
- PVP smooth gray Mean
- Polycarbonate Solar Blue
- Clear Polycarbonate
- Clear Polycarbonate Solar
- Polycarbonate Solar Gray
Filmography
DOWNLOAD
Directions for use and hibernation
We recommend that you follow these simple guidelines for the proper functioning of the automatic cover:
-
Before any action on the cover, you must ensure that no person is not in the pool and there are no objects that might obstruct the correct maneuver.
-
To maintain a good level of water is also important since a level too low or too high can cause a blockage of the beam, the separation wall or ladder.
-
During the maneuvers to cover or close to not block the cover, this action may be dangerous, besides being detrimental to the operating mechanism.
-
When using an automatic cleaner must verify that the opening operation of the cover was not wrapped around the pipe or power cable.
-
It is recommended to regularly clean cover with a pressure cleaner or a liquid descaling PVC. We must also avoid the leaves stay on the coverage as they can stain the slides.
-
In the case of hail recommend that collection coverage.
-
In the submerged model (buried) Roussillon, Roussillon II, we recommend you always keep dry the motor housing to prevent it from getting wet
.
For a good sleep and that in the spring find the pool in the best conditions, we must follow these basic tips:
-
Leave the peeled cover on the water level.
-
Maintain regular water level. A possible excess must be removed from the drain or the drain of skimmers.
-
It is advisable to clean the valve and the motor housing with a high-pressure cleaner before the pool hibernation.
-
We put a series of anti-ice floats in the valve housing, behind the cover. We must also protect the skimmers with some anti-ice buoys.
-
recommended to install a cover to prevent leaves and other waste may hide valve. This cover should be cleaned regularly.
-
In the case of ice formation, we recommend not to press the blades becomes not damaged.
-
In the case of the engine flood risk, it is advisable to cut the power supply of the electrical box and disassemble the engine.
If you would like a quote for the cover, please fill in the following form
Produits recommandés
- Choosing a selection results in a full page refresh.