5lts Packaging
newly designed liquid polymer, with a great power flocculant able to eliminate colloidal particles, found in pool water and causing turbidity in the water.
Improves bacteriological water quality and consequently reduces the consumption of products used for the disinfection
Treatment recovery:. With filtration equipment stopped and without the presence of bathers in the pool, add 10 ml. of product per m3 of water.
Pour the required product dose in a container with water and distribute the solution on the pool surface evenly.
After about 8 hours, the layer flakes deposited on the bottom of the pool will be collected and removed
Maintenance treatment:. It can be carried out by means of a metering pump, before injecting 0.5 ml of the filter. product per m3 of water in circulation.
Strength:
Initial treatment: 1lt per 100m3
Maintenance Treatment: 0,5lt per 100m3
FLOCCULANT
The pool water often loses its transparency condition appears when turbidity caused by:
• ALGAE PRESENCE, BACTERIA, ORGANIC MATTER.
• PRECIPITATION OF CALCIUM SALTS AND MAGNESIUM.
• DUST INTRODUCED BY AIR OR BY BATHERS.
• RUST OF SALTS OF IRON AND MANGANESE.
• RAIN MUD, ETC.
In most of these cases the particles are introduced into the water as small size (colloidal) that are not large enough to be retained by the filtration equipment.
CTX FLOCCULANTS OFFERS A RANGE AND COAGULANTS FULL TO RESOLVE ANY PROBLEM IN TURBIDITY WATER POOL.
BENEFITS
The use of flocculants produces increasing the size of colloidal particles in suspension and its container (settling) in the bottom of the pool tank and can thus be easily removed.