CTX-120 Hypocal (Non-Stabilized Chlorine) - Calcium Hypochlorite

Calcium hypochlorite granules of quick dissolution with 65-70% of useful chlorine, for disinfection and maintenance of crystal clear and hygienically pure water.

Ideal for all types of pools, spas, industrial waters with low hardness.

Shock treatments. Does not add cyanuric acid in the pool water, and has a high chlorine concentration (65%).

Dosage: 10g for every 10m3 of water daily. 

Instructions for use:

Introduce the necessary dose of Product inside the skimmers, then putting the filtration equipment into operation, so that the product is dissolved when the water circulates through the skimmers.

The dose of product can also be evenly distributed over the surface of the pool. The addition of the product should preferably take place at dusk and without the presence of bathers in the pool.

Characteristics:

Granulated calcium hypochlorite of rapid dissolution with 65-70% of useful chlorine, for the disinfection and maintenance of crystal clear and hygienically pure water.

Ideal for: All types of pools, spas, industrial waters with low hardness.

Shock treatments: Does not add cyanuric to pool water and has a high chlorine concentration (65%).

Introduce the required dose of product into the skimmers and then put the filtering equipment into operation so that the product can be dissolved, circulating through the skimmers.

You can also distribute the dose of product evenly over the surface of the pool.

The product should preferably be added at sunset and without bathers in the pool water.

The free residual chlorine should be between 0.5-2 mg / l. This value will be easily measured using a chlorine and pH analyser kit.

This control should be carried out at least twice a day.

Avoid contact of the product on glass surfaces, in polyester, liner or vinyl pools, when discoloration occurs on these surfaces.

Initial treatment: Add 15 grams of product per m3 of water.

After 2 hours, adjust the pH of the water between 7.2-7.6 using the CTX-10 solid pH grinder or the CTX-20 solid pH increaser.

The initial treatment (Superchlorination) should be repeated whenever there is a lack of transparency in the water.

Maintenance treatment: With the pH of the water adjusted, add 1 to 2 grams per day. of product, for each m3 of water.

These doses are indicative and can be modified depending on the characteristics of each pool.