| Flow detector 25- |
|
|
| 26. Probe discharge ST5 |
|
|
| 27. Discharge probe ST4 |
|
|
| 28- ST1 discharge Probe |
|
|
| 29. Probe discharge ST2 / ST3 |
|
|
| 30- electrical PREM Set 6 |
|
|
| 30- electrical PREM Set 8, Z300 PM3041 and M4 |
|
|
| Electrical assembly PREM 30- 11M, and PM3051 Z300 M5 |
|
|
| Electrical assembly 11T 30- PREM, Z300 and T5 PM3053 |
|
|
| 30- Conunto. PREM electrical 13M, Z300 PM3061 and M7 |
|
|
| 31. Condenser fan 5μF |
|
|
| 33. The contactor 25 230 V 50/60 Hz PFPREM 11 M, 13 M |
|
|
| 33. A. Contactor 18 PM / PREM 6,8,11T, 11TD, 15TD |
|
|
| 34. Varistor (S20K275) |
|
|
| 35. Capacitor 45μF aluminum PFPREM 6 |
|
|
| 35- Condenser alu 50μF PFPREM 8, PM3041 and Z300 M4 |
|
|
| 35- Condenser alu 55μF PFPREM 11, PM3051 / 53 and Z300 M5 |
|
|
| 35- Condenser alu 60μF PFPREM 13M, PM3061 and Z300 M7 |
|
|
| 38- phase controller (tri PREM) |
|
|
| 40- gear coil SAG UKV A053 to PREM |
|
|
| 46- main electronic card Kit A1 + solenoid valve card A4 |
|
|
| 46- main electronic card A1 |
|
|
| 46- solenoid valve card A4 |
|
|
| A2 47. Control card |
|
|
| 66- Motor fan |
|
|
| 66- filter 25A C3 |
|
|
| 1- Compressor 6 PFPREM |
|
|
| 1- Compressor PFPREM 8, Z300 PM3041 and M4 921 |
|
|
| 1- Compressor PFPREM 8, Z300 PM3041 and M4 922 |
|
|
| 1- Compressor PFPREM 11TD, y PM3056 Z300 T5 |
|
|
| 1- Compressor PFPREM 13M, Z300 PM3061 and M7 |
|
|
| Compressor suction pipe PFPREM 11/13, PM3051 / 53 / Z300 61e M5 / T5 / M7 |
|
|
| 6- evaporator PFPREM 6/8 and M4 Z300 |
|
|
| 6- PFPREM 11/13 Evaporator, PM3051 / 53/61 and Z300 M5 / T5 / M7 |
|
|
| 17- UKV expansion valve for PFPREM 6/8, PM3041 and Z300 M4 |
|
|
| 17- Expansion valve for PFPREM UKV 11, PM3051 / 53 and Z300 M5 / T5 |
|
|
| 17- expansion valve UVK 30D33 to PFPREM 13M, PM3061 and Z300 M7 |
|
|
| 44- welding pressure switch bp |
|
|
| 45- pressure switch hp welding |
|
|
| 100- 6 kW Condenser 6 PFPREM |
|
|
| 100- 7.5 kW Condenser PFPREM 8, Z300 PM3041 and M4 |
|
|
| 100- 9.5 kW Condenser PFPREM 11, PM3051 / 53 and M5 Z300 / T5Condensador 9.5 KW PFPREM 11, PM3051 / 53 y Z300 M5 / T5 |
|
|
| 100- Condenser 13 kW PFPREM 13M, PM3061 and Z300 M7 |
|
|
| 10- Top cover |
|
|
| Front Front 11- |
|
|
| 12- blowing grill |
|
|
| 13- Technical Access Portal |
|
|
| 14. Panel condenser salida |
|
|
| 15. Base |
|
|
| 16. Separate body |
|
|
| 2- compressor insulation PFPREM 6/8 PM3041 and M4 Z300 |
|
|
| 2- compressor insulation PFPREM 11/13, PM3051 / 53/61 and Z300 M5 / T5 / M7 |
|
|
| 7 Channel Plastic elbow. Condensates. |
|
|
| 8- Lexan/adesivo |
|
|
| Propeller fan 67- |
|
|
| 68. Support the fan motor |
|
|
| 68. Kit capacitor support connector |
|
|
| 71- protective grille 1045x765 |
|
|
| E condenser connector (inlet water) |
|
|
| Hydraulic Connector - the condenser inlet sealing + |
|
|
| Connector condenser (water outlet) |
|
|
| condenser inlet connector 3 with fasteners outlet sealing + |
|
|
| F Set of 2 accessories 40/49 |
|
|
| Silentblocks 50- (at least 4 units) |
|
|
| Condensation tray (Z Zodiac 300 and Power) |
|
|
| Unit distance control |
|
|
| Facilities Technical Kit |
|
|
| Winterabdeckung |
|
|
| Kit PAC network |
|
|
