SMART LIGHT lighting system

- In alloy or unbreakable polypropylene, free-standing or recessed, a wide choice of LED lights to organise your exterior.
- All the lights shown here are submersible.
- All connections, transformers and sensors are waterproof (IP68 certified). Low voltage (12 V).
- The entire Heissner lighting concept can be connected very easily with the integrated 3 m cable (extension possible).
- You can synchronise and remotely control the entire lighting system using the free Heissner app. The app will allow you to adjust the colour (for the RGB model), the timer, the different lighting modes and synchronise all your LEDs to the music of your favourite playlist!

*: flush mounting box Alt 140 X Ø 72 included; required diameter: 50 mm.

**: required diameter: 38 mm.

 Accessories

Waterproof transformer (IP67) 16 W - 2 m cable
Waterproof transformer (IP67) 60 W - 2 m cable
Waterproof transformer 2 poles output (IP67) 105 W - 2 m cable
Connection box 2 poles - 3 connections - 5 ml
Connection box 2 poles - 3 connections - 10 ml
Connection box 4-pole - 3 connections - 1 ml
Extension 2 poles - 5 ml
Extension 2 poles - 10 ml
4 pole Extension - 5 ml
4 pole Extension - 10 ml
Twilight sensor 1ml*.
RGB dimmer (for colour light control) range: 30 m
WIFI RGB dimmer (for colour light control)**

*: it switches on at dusk and off at dawn

**: essential for controlling your installation with the dedicated application.

The 2-pole designations are for white spots.
The 4-pole designations are for RGB spots.

* the twilight sensor (ref. CAPCRE) switches on at twilight and off at sunrise.

** the RGB regulator (ref. REGRGB30) is essential for using the remote control. It connects directly to the transformer (2-pole) and is equipped with a 4-pole output: it can only drive RGB projectors.

*** the RGB Wifi controller (ref. REGRGBWIFI) is essential for controlling the lighting from your mobile phone using the dedicated app. It connects directly to the transformer (2 poles) and is equipped with a 4-pole output and a 2-pole output: essential if you want to use white and RGB projectors.

All white LEDS are in warm white: 2 800 K.
Brightness comparison:
- LED 1 W: 65 lumens: equivalent to a 10 W light bulb
- LED 4 W: 320 lumens: equivalent to a 30 W light bulb
- LED 6 W: 400 lumens: equivalent to a 40 W light bulb
- LED 9 W: 500 lumens: equivalent to a 50 W light bulb