Powerforce Wärmepumpen - Rekambios

22- Engine lower fan

390.400 Ft

A2 48. Control card

138.100 Ft

46- main electronic card A1

246.000 Ft

58- Card A4

51.700 Ft

47- fan electronic card A3 + protection circuit

382.800 Ft

50- crankcase heater 45W Compressor

115.500 Ft

50 circuit protection

212.800 Ft

52- fuse terminal block 5 x 20A

54.200 Ft

The contactor 25 91-

62.600 Ft

Driver stages 90-

63.800 Ft

83/84/85/87 / 88- single probe ST1, ST2, ST3, ST4 and ST5

19.400 Ft

49- EMC filter 6A 250V

120.500 Ft

Varistor (S20K275)

5.900 Ft

Klixon compressor

72.200 Ft

Starter Compressor

818.000 Ft

66b- Compressor Power Force35

2.759.100 Ft

66a- Compressor Power Force35

2.067.800 Ft

69- Condenser Power Force 25 and 35

662.700 Ft

70- Evaporator

3.294.600 Ft

4-way valve 75-

239.700 Ft

73. Expansion valve UKV32D

304.300 Ft

72- Dehydrator 164S

170.000 Ft

71- liquid bottle

216.200 Ft

74. The coil 102 UKV-LG700

92.800 Ft

76- coil 4-way valve 518A1 STEF-01AI

79.000 Ft

Pressure Switch welding bp

38.200 Ft

Pressure switch hp welding

41.600 Ft

9 Front panel

334.500 Ft

8- front panel pressure gauge

153.200 Ft

8- front panel pressure gauge (after Novembro.2015)

141.900 Ft

Side panel 7-

243.900 Ft

Rear panel 6 (2015)

322.800 Ft

Rear panel 6- (after Novembro.2015)

322.800 Ft

Top panel 4- (roof)

183.900 Ft

Separate the body 5-

83.100 Ft

1/2/3 Footer

409.200 Ft

101- collector Cond. Force power (Input)

45.000 Ft

102- collector Cond. Force Force (Output)

45.000 Ft

103- Set of two medium supplies (unit) 32/47 5mm thickness

8.900 Ft

68. Insulation of compressors

169.600 Ft

24. propeller blades 3

105.800 Ft

32- fan protection grille

88.200 Ft

36. Grid 1,350 x 1,490 mm

80.600 Ft

26- fan ring

273.300 Ft

33. Pressure Gauge Adhesive

50.800 Ft

27. Handle plastic gasket +

35.300 Ft

21- ventilation Support

92.400 Ft

Joint letter A2

900 Ft

soporte collecting condenser kit

6.800 Ft

104 / 105- in fitting parts 63 of diameter 3

19.400 Ft

Fitting condenser (water inlet)

11.800 Ft

Hydraulic Fitting - condenser outlet seal supported +

5.900 Ft

Fitting condenser (water outlet)

10.500 Ft

Hydraulic coupler - the condenser inlet sealing +

3.800 Ft

remote control unit

316.900 Ft

Kit PAC net

73.900 Ft

Tray condensation

226.700 Ft