Maytronics
Zodiac
CTX
Bayrol
HTH
Piscimar
Spamar
AquaFinesse
Quimicamp
ACF-50
Astralpool
Polaris
Ecopool
Hayward
Davey
Poolstar
Wellis
Cet Cryospas
Karcher
Aquark
Weber
Igno
Hunter
RainBird
Informationen zum Produkt
Marke
RAINBIRD
The RWS is a deep underground root irrigation system.
• Made of high quality polymer with thermoplastic inhibitors, resistant to UV rays.
• It is installed close to the root zone of the plant (2 per plant).
• Minimal evaporation and wind losses.
• Promotes the healthy growth of trees and shrubs by allowing water, oxygen and nutrients to reach the root zone.
• Ideal for urban areas.
• The grill closing function protects the system against vandalism.
• Fitted with self-compensating bubbler nozzle, model 1401 by RainBird.
• Recommended flow: 0.06 m3/h to 0.46 m3/h.
• Working pressure: 1.5 to 4.0 bar.
Root flooder
Trees: two flooders must be placed of roots per tree. In situations where there is a slope, a floodwater
must be placed in the upper part of the terrain. For large and medium-sized trees, the 91.4 cm model should be used.
Shrubs: if it is an isolated shrub, two overflowers must be placed. In situations where there are several shrubs, a pond must be placed between each plant. For small trees and medium shrubs you should use the 45.7 cm template.
Product Features
• Made of high quality polymer with thermoplastic inhibitors, resistant to UV rays.
• It is installed close to the root zone of the plant (2 per plant).
• Minimal evaporation and wind losses.
• Promotes the healthy growth of trees and shrubs by allowing water, oxygen and nutrients to reach the root zone.
• Ideal for urban areas.
• The grill closing function protects the system against vandalism.
• Fitted with self-compensating bubbler nozzle, model 1401 by RainBird.
• Recommended flow: 0.06 m3/h to 0.46 m3/h.
• Working pressure: 1.5 to 4.0 bar.
Root flooder
Trees: two flooders must be placed of roots per tree. In situations where there is a slope, a floodwater
must be placed in the upper part of the terrain. For large and medium-sized trees, the 91.4 cm model should be used.
Shrubs: if it is an isolated shrub, two overflowers must be placed. In situations where there are several shrubs, a pond must be placed between each plant. For small trees and medium shrubs you should use the 45.7 cm template.
Features
Product Data
- Investment Protection - Large, deep roots that can provide good results for transplant survival, stability in very strong winds, and fast, healthy growth
- Water efficiency - A Underground root irrigation minimizes runoff and evaporation
- Green space aesthetics s - Installs below ground level and helps minimize damage to built structures
Product Features
- Airing and Underground Watering Prevents Tree and Shrub Replanting Shock
- Maximum Efficiency Tree Watering Solution – even 95% uniformity of emissions with minimal wind, evaporation or loss of edge control
- The aesthetic underground sprout contributes to the natural look of the landscape
- The blocking grid prevents vandalism
- Helps prevent surface root growth and us in spaces with decorative landscape elements
- Attractive looking below-ground installation
- Factory-mounted, self-contained units for assured reliability
Specs
Technical Specifications
- 4" (10.2 cm) retaining cap and vandal resistant locking grille complete a tube 36" (91.4 cm) semi-rigid mesh size
- Factory installed swivel sets (excluding RWS-BGX) with a br 1401 otator (0.25 gpm; 0.95 l/m), or 1402 (0.5 gpm; 1.9 l/m) on a fixed lifting device simplify connection to sidelines
- Options: Non-drain valve to prevent draining of the lines (10 ft. Min. and blocking); sand for use in fine soils; purple grid to indicate non-potable water resources
| RWS-Mini | RWS-BGX | |
| Dimensions | Height: 45.7 cm / Diameter: 10.2 cm | Height: 91.4 cm / Diameter: 10.2 cm |
| Nozzle | Bubbler 1401 - Flow: 0.06 m3/ h Jet Irrigation | Bubbler 1401 - Flow: 0.06 m3/h Jet Irrigation |
Empfohlene Produkte
- Die Auswahl einer Auswahl führt zu einer vollständigen Seitenaktualisierung.